Seadoo Wake Wear Ring In Shallow Water

January 28, 2017

Running a watercraft in shallow water or near land can suck up sand, rocks, and debris off the bottom—damaging the pump impeller and destroying the wear ring. Always keep at least 2 ft of water under the intake.

Damaged Sea-Doo jet pump wear ring with sandy debris and impeller damage from shallow water operation

Why Shallow Water Destroys Wear Rings


Running a watercraft in shallow water or near land can suck up sand, rocks, and sediment off the bottom. That abrasive material gets pulled through the jet pump, grinding against the impeller and wear ring. The wear ring—the white plastic or composite ring that seals the clearance around the impeller—takes the brunt of the damage, chipping, cracking, and wearing away until the pump loses efficiency and cavitates.

Prevent Damage


Always keep at least 2 ft of water under the intake grate. Avoid running in shallow areas, near shore, or where the bottom is sandy or rocky. If you need pump or wear ring service, we can inspect, replace worn parts, and get you back on the water. Call 865-257-5998 or submit a service request.

Need Service?

Watercraft repair and service at 865 Customz, Maryville TN.

Call 865-257-5998 Service Request