OEM torque specifications for Yamaha 4-stroke marine engines. Use as reference for engine rebuilds and mechanical service. Verify against your model’s service manual for year-specific variations.
| Component | Torque Specification |
|---|---|
| Cylinder head bolt (M6 × 3) | 10 Nm (7.2 ft-lb) |
| Cylinder head nut (× 10, in 3 groups — see manual sequence) | 1st: 20 Nm (14 ft-lb) · 2nd: 140° ± 5° (2 nuts), 121° ± 5° (3 nuts), 105° ± 5° (5 nuts) |
| Cylinder head cover bolt (valve cover) | 12 Nm (8.7 ft-lb) — aluminum head, do not over-tighten |
| Camshaft cap bolt (exhaust / intake) | 10 Nm (7.2 ft-lb) |
| Camshaft sprocket bolt | 24 Nm (17 ft-lb) |
| Connecting rod cap nut | 1st: 20 Nm (14 ft-lb) · 2nd: 120° ± 5° |
| Lower crankcase bolt (M6 × 10) | 12 Nm (8.7 ft-lb) |
| Lower crankcase bolt (M9 × 10) | 1st: 7.8 Nm (5.6 ft-lb) · 2nd: Loosen completely · 3rd: 15 Nm (11 ft-lb) · 4th: 49° ± 5° |
| Oil pan bolt | 12 Nm (8.7 ft-lb) |
Per Yamaha VX110 Sport service manual (LIT-18616). MR-1 used in VX110, FX140, VX140, FX Cruiser, VX Deluxe, and early jet boats. Verify tightening sequence in manual before reassembly.
| Component | Torque Specification |
|---|---|
| Cylinder head bolt “4” (M10) | 1st: 25 Nm (18.4 ft-lb) · 2nd: 25 Nm · 3rd: 180° |
| Cylinder head bolt “5” (M8) | 10 Nm (7.4 ft-lb) |
| Camshaft cap bolt | 10 Nm (7.4 ft-lb) |
| Connecting rod bolt | 1st: 20 Nm (14.8 ft-lb) · 2nd: 120° |
| Crankcase bolt “2” (inner) | 1st: 15 Nm (11.1 ft-lb) · 2nd: 15 Nm · 3rd: 70° |
| Crankcase bolt (M6 × 52 mm) “1” | 12 Nm (8.9 ft-lb) |
| Crankcase bolt (M6 × 45 mm) “2” | 12 Nm (8.9 ft-lb) |
| Crankcase bolt (M6 × 85 mm) “3” | 12 Nm (8.9 ft-lb) |
| Crankcase bolt (M6 × 55 mm) “4” | 12 Nm (8.9 ft-lb) |
| Crankcase bolt (M8 × 70 mm) “5” | 24 Nm (17.7 ft-lb) |
| Balancer weight bolt | 35 Nm (25.8 ft-lb) |
TR1 (3-cylinder) specs are from other sources. The VX110 Sport manual (LIT-18616) covers MR-1, not TR1. Verify against a TR1-specific service manual.
| Component | Torque Specification |
|---|---|
| Camshaft cap bolt “1” | 16 Nm (11.8 ft-lb) |
| Cylinder head bolt “5” (M12) | 1st: 55 Nm (40.6 ft-lb) · 2nd: 90° |
| Connecting rod bolt | 1st: 51 Nm (37.6 ft-lb) · 2nd: 90° |
| Crankcase bolt “2” | 1st: 30 Nm (22.1 ft-lb) · 2nd: 90° |
| Component | Torque Specification |
|---|---|
| Cylinder head bolt (M12 × 140 mm) | 1st: 48 Nm (35.4 ft-lb) · 2nd: 90° |
| Cylinder head bolt (M6 × 55 mm) | 10 Nm (7.4 ft-lb) |
| Camshaft cap bolt | 16 Nm (11.8 ft-lb) |
| Camshaft sprocket bolt | 24 Nm (17.7 ft-lb) |
| Timing chain tensioner bolt | 10 Nm (7.4 ft-lb) |
| Cylinder head cover bolt | 8 Nm (5.9 ft-lb) |
| Connecting rod nut | 1st: 51 Nm (37.6 ft-lb) · 2nd: 90° |
| Crank bolt | 80 Nm (59.0 ft-lb) |
| Crankcase bolt 1–0 (M10 × 85 mm) | 1st: 30 Nm (22.1 ft-lb) · 2nd: 90° |
| Crankcase bolt A–L (M6 × 70 mm) | 10 Nm (7.4 ft-lb) |
| Bracket bolt | 50 Nm (36.9 ft-lb) |
| Transfer shaft | 120 Nm (88.5 ft-lb) |
| Drive coupling | 80 Nm (59.0 ft-lb) |
| Flywheel magneto bolt | 24 Nm (17.7 ft-lb) |
| Stator coil / clamp bolt | 15 Nm (11.1 ft-lb) |
| Thermostat housing bolt | 8 Nm (5.9 ft-lb) |
| Supercharger bolt (M8 × 65 mm) “1” | 20 Nm (14.8 ft-lb) — LOCTITE 242. Tighten bolt 1 first to specified torque. |
| Supercharger bolt (M6 × 65 mm) “2” | 10 Nm (7.4 ft-lb) |
| Supercharger oil filler hole bolt | 4 Nm (3.0 ft-lb) |
Need professional engine work? View our Engine Rebuild Service